Semi-automatic Solder Coste Printer

Imveliso yomkhiqizo

1. Ukulawulwa kwekhompyuter encinci, umboniso wesikrini sokuchukumisa, ujongano lokusebenza kwemenyu.

2. I-scraper edadayo. (Ngokufana nomatshini wokushicilela ozenzekelayo, i-scraper inokudada ngokukhululekileyo phezulu nangaphantsi kwaye ilungelelanise ngokuzenzekelayo kwinqanaba le-mesh yensimbi).

3. Uxinzelelo lwe-scraper luhlengahlengiswa (uxinzelelo lwe-scraper kwi-mesh yensimbi lunokutshintshwa ngokuhambelana nobude beemodeli ezahlukeneyo ze-scrapers).

4. I-mesh yensimbi ishiya ibhodi ye-PCB kwaye i-demoulds ngokuzenzekelayo, i-adjustable ukusuka kwi-0 ukuya kwi-5 imizuzwana.

5. Umsebenzi wokusebenza uthatha umsebenzi wokutshintsha iqhosha elibini ngesandla, elikhuselekileyo nelithembekileyo.

6. Imenyu yesikrini sokuthinta inokuzimela ngokuzimeleyo i-scraper i-stop stop yasekhohlo, ixesha lokumisa elisezantsi lasekhohlo, i-right stop stop, kunye nexesha lokumisa elisezantsi lasekunene, kunye nexesha elipheleleyo lokumisa i-mesh yensimbi.

7. Kukho iindlela ezahlukeneyo zokubeka ezichanekileyo kwiibhodi ze-PCB, kubandakanywa ukubekwa kwe-reference hole, i-reference edge positioning, kunye nokubekwa ngexesha elifanayo lomngxuma wereferensi kunye ne-reference edge, i-template positioning, njl.

8. Isikrini sokuchukumisa sixhotyiswe ngomsebenzi wokubonisa ixesha, ukubala ngokuzenzekelayo kwamaxesha okushicilela umsebenzi, kunye nomsebenzi wokukhusela isikrini.

9. Ukuxhotyiswa ngesantya se-scraper sasekhohlo kunye nesokunene kunye nomsebenzi wokhuseleko wokumisa ngokukhawuleza.

EZIMISEBENZI

Ubungakanani bePCB Ubukhulu: L1200 * W240mm

Indawo yetafile yoshicilelo L1300 * W320mm

Inaliti yokuma yereferensi

Lungisa kakuhle umphambili/umva ± mm nasekhohlo/ekunene ± 10mm weqonga

Ukuchaneka koshicilelo ± 0.2mm

Ukuphindaphinda ukuchaneka ± 0.2mm

Ubukhulu bebhodi esisiseko 0.2-2.0mm

Umthombo womoya 4-6 kg / cm2

Ubonelelo lwamandla AC220V 50Hz/60HZ

Imilinganiselo yangaphandle L1600 * W700 * H1700mm