R & D, production and sales of automation and intelligent equipment for electronic production line

Contact Us

contact us

Service Hotline:400-0599-111


Eight-temperature zone microcirculation reflow soldering equipment GSD-M8NECategory:Reflow soldering machine series

Introduction:Technical parameters, advantages and structure pictures of eight-temperature zone micro-circulation reflow soldering equipment


Structure diagram of microcirculation reflow soldering equipment with eight temperature zones


Performance characteristics of eight-temperature zone microcirculation reflow soldering equipment

● In order to prolong the service life of the motor, our company’s technicians professionally designed it; make the internal cooling cycle convection, so that the temperature around the motor drops to about 38°C;

● The high-quality, high-temperature, high-speed motor has smooth wind, low vibration and low noise;

● Professional wind wheel design, stable wind speed, effectively prevent the uniformity of the wind when the PCB board is heated, and achieve high repeated heating;

● Each temperature zone adopts forced independent circulation, independent PID control, and independent heating methods up and down, so that the temperature of the furnace cavity is accurate and uniform, and the heat capacity is large;

● Online UPS equipped with power failure protection function to ensure the normal output of the PCB board after power failure without damage;

● Independently controlled cooling system, forced air cooling; the temperature of the PCB board after the machine is ≤50℃;

● The insulation layer is made of high-quality aluminum silicate insulation material, and the multi-layer insulation furnace design. The surface temperature of the furnace outer jacket is about 5 degrees higher than the ambient temperature, which effectively reduces the working environment temperature, has good insulation effect, and heats up quickly, from room temperature to working temperature. ≤20min; Special furnace design, low power consumption;

ItemSpecification type
Control SystemPC+PLC/Dedicated MCU
Heating/cooling zoneA total of 16 heating zones / full hot air microcirculation from top to bottom
Length of heating zone2800mm
Temperature control rangeRoom temperature~350℃
Temperature control accuracy±1~2 ℃
Three-point temperature difference±2℃
cooling methodForced air cooling / 2 independent cooling zones
PCB size30~350mm width
PCB Transmission height900±20mm
Delivery methodChain track + mesh belt conveyor
Transmission directionLeft → right
Transmission speed0~2000 mm /min
Chain track widening range30~350 mm
Transmission mesh belt width400 mm
power supplyA3ø380V 50HZ
Normal operating power/total power10.8/50KW
Dimensions (L*W*H)5200mm(L)*1400mm(W)*1500mm(H)
net weight1250KG

Related Products