R & D, production and sales of automation and intelligent equipment for electronic production line

Contact Us

contact us

Service Hotline:400-0599-111


Medium-sized eight-temperature zone lead-free reflow soldering GSD-8MCCategory:Reflow soldering machine series

Introduction:Medium-sized eight-temperature zone lead-free reflow soldering GSD-8MC


Features of GSD-8MC control system for lead-free reflow soldering in the eight-temperature zone of Guangshengde

● Windows operating system, Chinese and English interface, easy to learn; two control methods, computer control and emergency manual control, with safety protection function; (independently developed software: Guangshengde PCBASE reflow soldering control software V1.0)

● The communication between PC and PLC (single-chip microcomputer) adopts PC/PP protocol, which works stably and prevents crashes;

● Powerful software function, online temperature measurement of PCB board, and analysis, storage and printing of the data curve at any time;

● Automatic monitoring and display of equipment working status, which is helpful for monitoring equipment at any time;

The performance advantages of GSD-8MC lead-free reflow soldering in eight temperature zones of Guangshengde

● In order to prolong the service life of the motor, our company’s technicians professionally designed it; make the internal cooling cycle convection, so that the temperature around the motor drops to about 38°C;

● The high-quality, high-temperature, high-speed motor has smooth wind, low vibration and low noise;

● Professional wind wheel design, stable wind speed, effectively prevent the uniformity of the wind when the PCB board is heated, and achieve high repeated heating;

● Each temperature zone adopts forced independent circulation, independent PID control, and independent heating methods up and down, so that the temperature of the furnace cavity is accurate and uniform, and the heat capacity is large;

● Online UPS equipped with power failure protection function to ensure the normal output of the PCB board after power failure without damage;

● Independently controlled cooling system, forced air cooling; the temperature of the PCB board after the machine is ≤50℃;

● The insulation layer is made of high-quality aluminum silicate insulation material, and the multi-layer insulation furnace design. The surface temperature of the furnace outer jacket is about 5 degrees higher than the ambient temperature, which effectively reduces the working environment temperature, has good insulation effect, and heats up quickly, from room temperature to working temperature ≤20min; Special furnace design, power consumption is the lowest in the industry;

Guangshengde eight temperature zone reflow soldering mass production, available from stock


Special reminder

1. Guangshengde reflow soldering equipment is underwritten by Ping An Insurance Company of China, and the amount of compensation can reach 5 million. Guangshengde reflow soldering brings greater guarantee for customers' safe production.

2. The purchase of Guangshengde reflow soldering equipment can be paid by monthly installments, please consult Guangshengde for details.

ItemSpecification type
Control SystemPC+PLC/Dedicated MCU
Heating/cooling zoneA total of 16 heating zones / upper hot air, lower infrared
Length of heating zone3100mm
Temperature control rangeRoom temperature~350℃
Temperature control accuracy±1~2 ℃
Three-point temperature difference±2℃
cooling method2 independent cooling zones, forced air cooling
PCB size30~350mmwidth
PCB Transmission height900±20mm
Delivery methodChain track + mesh belt conveyor
Transmission directionLeft → right
Transmission speed0~2000 mm /min  
Chain track widening range30~350 mm
Transmission mesh belt width400 mm
power supplyA3ø380V 50HZ
Normal operating power/total power5/40KW
net weight910KG

Related Products